|
Suzuki 4x4 Club™ Dedicated to all Suzuki 4x4 Owners
|
View previous topic :: View next topic |
Author |
Message |
410stu *
Joined: 08 Mar 2010 Posts: 34 Location: blackpool
|
Posted: Mon Mar 22, 2010 0:03 Post subject: smoke is the question here (SJ) |
|
|
What can cause white smoke + oil from the exhaust ?
after about 2 hours at briercliffe today the little sj started to blow oil out of the breather at the top of the engine,
then noticed it was also coming out the exhaust with loads of smoke (white smells of oil). so put a bung in the top breathe, topped up oil and played. smoke stopped and started all day. had to be topped up with oil a few times over the day. sj ran well no loss of water or anything like that, just oil and smoke.
your thoughts ????
work i need to do to sort out ???? |
|
Back to top |
|
|
Google Sponsor
|
Posted: Mon Mar 22, 2010 0:03 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
zocko *******
Joined: 13 Sep 2009 Posts: 1438 Location: Southampton
|
Posted: Mon Mar 22, 2010 13:30 Post subject: |
|
|
sounds like rings maybe? _________________ the car in front is a toyota...
the car pulling it out of the mud is a suzuki |
|
Back to top |
|
|
410stu *
Joined: 08 Mar 2010 Posts: 34 Location: blackpool
|
Posted: Mon Mar 22, 2010 13:48 Post subject: |
|
|
is it an easy fix ?? |
|
Back to top |
|
|
zocko *******
Joined: 13 Sep 2009 Posts: 1438 Location: Southampton
|
Posted: Mon Mar 22, 2010 13:57 Post subject: |
|
|
how good are you at engine rebuilds?
about 3-4 hours if you know what youre doing _________________ the car in front is a toyota...
the car pulling it out of the mud is a suzuki |
|
Back to top |
|
|
410stu *
Joined: 08 Mar 2010 Posts: 34 Location: blackpool
|
Posted: Mon Mar 22, 2010 17:52 Post subject: |
|
|
never done anything like it before !! i might as well try it tho !!!
found this before is it worth getting test done ???
Before you consider doing a ring job, I suggest that you check the
compression first. If it's good, it indicates that the rings are sealing
properly and probably don't need replacement.
Next, I would rebuild the head with new valve guides and seals, which
are a more likely source of oil consumption and smoking problems than
the rings. That's not a particularly difficult job and it probably needs
to be done even if the engine does need rings. |
|
Back to top |
|
|
zocko *******
Joined: 13 Sep 2009 Posts: 1438 Location: Southampton
|
Posted: Tue Mar 23, 2010 9:25 Post subject: |
|
|
it wint hurt to do both and its only about an 45 minute job once you have the head off.
its also a good time to drop the sump and clean all the old sludge out _________________ the car in front is a toyota...
the car pulling it out of the mud is a suzuki |
|
Back to top |
|
|
410stu *
Joined: 08 Mar 2010 Posts: 34 Location: blackpool
|
Posted: Tue Mar 23, 2010 17:03 Post subject: |
|
|
right got a 410 engine just got to go to doncaster give them a hand getting it out. take the rest on them bits off i need and it will be about £45 to £50 for the engine and £100 for the rest.
1.air box and seniors
2.leaf springs x4
3.sj front brake set calipers, bracket, bolts, discs, (so i can fit them to the rear)
4.spare wheel (no tyre needed)
5.back door handle
6.brake master cylinder (jap)
7. U bolts x2
8. longer or prop spacers |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|