Adrian Flux : 0800 916 1257

Suzuki 4x4 Club™
Dedicated to all Suzuki 4x4 Owners
 
 FAQFAQ   SearchSearch   Watched TopicsWatched Topics   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your personal messagesLog in to check your personal messages   Log inLog in 
suzuki 4x4 club forumsSuzuki 4x4 Forums   CalendarCalendar  Suzuki 4x4 Club ShopClub Shop  Suzuki 4x4 Classified Ads serviceClassified Ads
Suzuki 4x4 HomeSuzuki 4x4 Home   dynamic online chat serviceChatrooms  Yellow Diamond ClubsYellow Diamond Clubs

1996 coil sprung samurai


 
Post new topic   Reply to topic    Suzuki 4x4 Club™ Forum Index -> General technical Q&A
View previous topic :: View next topic  
Author Message
car-killer
Newbie


Joined: 22 Apr 2008
Posts: 2
Location: crawley west sussex

PostPosted: Tue Apr 22, 2008 20:23    Post subject: 1996 coil sprung samurai Reply with quote

a little help needed my mother who is retired and living in malta has the mentioned samurai and the trailing arm bushes need replacing bad.has any one got any info on how to get hold of these bushes. i do have he guys at SAMURIA PERFORMANCE (on the net ) looking in japan for these

                     any help welcome
Back to top
View user's profile Send personal message
Google
Sponsor





PostPosted: Tue Apr 22, 2008 20:23    Post subject: Google Ads keep this community free to join!


Back to top
DaiRees
****


Joined: 12 May 2007
Posts: 289
Location: Merthyr Tydfil, South Wales (God's Country!)

PostPosted: Tue Apr 22, 2008 20:41    Post subject: Reply with quote

Coil sprung Sammys never made it to the UK, so I'd imagine you'd struggle to get spares here. You might get more luck in mainland Europe, not sure whether the coilies were made in Spain or Japan or both, but I'm pretty sure they were sold in most markets except ours.

Tell you what though, if you can find out the specs for the part you might be able to match it. Jimny ones might be the same. Confused



Dreaming...... Mmmmmm, coil sprung diesel engined sammy hard top, bog standard looking but with a subtle lift, a rocklobster and some decent tyres........Mmmmm,  Twisted Evil
_________________
Back to top
View user's profile Send personal message MSN Messenger
car-killer
Newbie


Joined: 22 Apr 2008
Posts: 2
Location: crawley west sussex

PostPosted: Tue Apr 22, 2008 20:47    Post subject: Reply with quote

the chances of a maltise being able to measure to within a nats - - - - are slim to the nearest half inch maybe .but no i did start to think along those lines of parts copatability
Back to top
View user's profile Send personal message
CoilySam
Newbie


Joined: 09 May 2008
Posts: 1
Location: Malta

PostPosted: Fri May 09, 2008 23:09    Post subject: Reply with quote

Hi car-killer, no need to worry.You can buy trailing arm bushes from Australia.Coil spring Sams made it there.They call it the SJ80.Don't know why!.Enter SUZISPORT and he will supply.He got pollybush type.I have bought a 2" suspension lift from him,try not to bring them low cost cause he may send them by ship not air.
Back to top
View user's profile Send personal message
Display posts from previous:   
Post new topic   Reply to topic    Suzuki 4x4 Club™ Forum Index -> General technical Q&A All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

All contents © Hobson's Choice IT Solutions Ltd 1997 on
Powered by phpBB © 2001, 2005 phpBB Group