Adrian Flux : 01553 845 945

Suzuki 4x4 Club™
Dedicated to all Suzuki 4x4 Owners
 
 FAQFAQ   SearchSearch   Watched TopicsWatched Topics   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your personal messagesLog in to check your personal messages   Log inLog in 
suzuki 4x4 club forumsSuzuki 4x4 Forums   CalendarCalendar  Suzuki 4x4 Club ShopClub Shop  Suzuki 4x4 Classified Ads serviceClassified Ads
Suzuki 4x4 HomeSuzuki 4x4 Home   dynamic online chat serviceChatrooms  Yellow Diamond ClubsYellow Diamond Clubs

Vitara 97 bull bar fitting kit


 
Post new topic   Reply to topic    Suzuki 4x4 Club™ Forum Index -> General technical Q&A
View previous topic :: View next topic  
Author Message
Wellerman
Newbie


Joined: 03 Feb 2014
Posts: 8
Location: Kent

PostPosted: Thu Feb 06, 2014 18:55    Post subject: Vitara 97 bull bar fitting kit Reply with quote

Hi all apologies if this has been asked a million times but I have a set of bull bars to fit to the vitara I just bought but there's no fitting kit....is this something you can buy if so where can I get it or worst case scenario if I have to get something made what do I need?
Cheers for any help
Back to top
View user's profile Send personal message
Google
Sponsor





PostPosted: Thu Feb 06, 2014 18:55    Post subject: Google Ads keep this community free to join!


Back to top
DavidS
***


Joined: 30 Aug 2012
Posts: 188
Location: Maidstone, Kent

PostPosted: Fri Feb 07, 2014 11:55    Post subject: Reply with quote

Hi, normally there are brackets that come with/on the bars .... at the end of the down tubes are 2 brackets these offer up under the car and where they meet are 2 bolts (that should be on the car) ... undo those and bars should bolt on there ... as for other brackets I am not sure.
_________________
2003 GV1600 Sport Soft Top. Great for Fun in Snow and sun
Back to top
View user's profile Send personal message
scooby2112
Newbie


Joined: 16 Jun 2015
Posts: 6
Location: United Kingdom

PostPosted: Fri Jun 19, 2015 14:51    Post subject: Reply with quote

I have the same problem so going to fabricate brackets to reach front suspension bolts
Back to top
View user's profile Send personal message
jcmaloney
*


Joined: 04 Jan 2010
Posts: 19
Location: RATAE CORITANORVM

PostPosted: Wed Jul 08, 2015 20:21    Post subject: Reply with quote

My 95 vit has two additional support bars that were attached to the car but rotated & "hidden" in the gap between bumper and front grill. Easy enough to pull them out & attach to the bull bars. Underneath was easy enough as well.

Mine were original full size chrome jobs and re-fitted to my trucks original spec so are street legal.  Smile
Back to top
View user's profile Send personal message
Display posts from previous:   
Post new topic   Reply to topic    Suzuki 4x4 Club™ Forum Index -> General technical Q&A All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

All contents © Hobson's Choice IT Solutions Ltd 1997 on
Powered by phpBB © 2001, 2005 phpBB Group