Adrian Flux : 01553 845 945

Suzuki 4x4 Club™
Dedicated to all Suzuki 4x4 Owners
 
 FAQFAQ   SearchSearch   Watched TopicsWatched Topics   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your personal messagesLog in to check your personal messages   Log inLog in 
suzuki 4x4 club forumsSuzuki 4x4 Forums   CalendarCalendar  Suzuki 4x4 Club ShopClub Shop  Suzuki 4x4 Classified Ads serviceClassified Ads
Suzuki 4x4 HomeSuzuki 4x4 Home   dynamic online chat serviceChatrooms  Yellow Diamond ClubsYellow Diamond Clubs

SJ413 LWB Post Immobiliser Fitment Electrical Gremlins!


 
Post new topic   Reply to topic    Suzuki 4x4 Club™ Forum Index -> Electrics / wiring / lights etc
View previous topic :: View next topic  
Author Message
pieandapint
Newbie


Joined: 30 Apr 2015
Posts: 1
Location: United Kingdom

PostPosted: Thu Apr 30, 2015 17:14    Post subject: SJ413 LWB Post Immobiliser Fitment Electrical Gremlins! Reply with quote

Hi Folks, I have been banging my head against the wall due to a problem with my SJ. It arose after fitting a Gemini immobiliser. Everything worked fine prior to fitment but now indicators/hazards and front wipers don't work. (Not even with immobiliser deactivated)

I've checked and replaced all relevant fuses, and since I've only physically cut the starter motor and coil wires to be controlled by the immobiliser, can't see where it all went wrong.

Everything else still works as expected and I've bypassed the fusible link to rule that out.

Here are the wires I've used in the hope that somebody can point me in the right direction:

First circuit cut: Starter motor (black with yellow stripe)
Second cut: Coil (black with white stripe)
Permanent live: White with yellow stripe on black fuse board connector.
Ignition live 1: Yellow with green stripe on black fuse board connector.
Ignition live 2: Brown with blue strip on red fuse board connector.
Ground 1: Chassis near glove box.
Ground 2: Green fuse board wire.

I had a look through the service manual and got some info regarding testing at the connectors but the information doesn't correspond to my vehicle as it refers to different connectors than what I have.

Also to note is I can hear the wiper motor clicking when I change the position of the stalk.

If you've read this far you've done well! Sorry for the information overload, I can usually get myself out of these problems but this one is doing my head in.

Thanks in advance
Dave.
Back to top
View user's profile Send personal message
Google
Sponsor





PostPosted: Thu Apr 30, 2015 17:14    Post subject: Google Ads keep this community free to join!


Back to top
Display posts from previous:   
Post new topic   Reply to topic    Suzuki 4x4 Club™ Forum Index -> Electrics / wiring / lights etc All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

All contents © Hobson's Choice IT Solutions Ltd 1997 on
Powered by phpBB © 2001, 2005 phpBB Group