Suzuki 4x4 Club™

[stumpylewis]

hi ive made a tubular front bumper which is similar in style to the american dune bumpers. what im doing now is adding a 12000lb winch just below. basically id like to know what points have been used around the front tubular crossmember and both end of the chassis legs to mount a plate. also where did you relocate the pas pipes? if any part of this can be answered i would be truely grateful.

[Google]

[me and the wife]

what car? any pics of the bumper, if i was to assume it was a vitara i bolted the rear of my winch tray through the front tube cross member that sits below the front grill, then i modified the grill around the winch    the ftont of the tray was incorporated in to the bumper that was bolted to the chassis legs. pas pipes were moved behind the front cross member

[stumpylewis]

Yes a 2 dr vitara. How do i upload a picture? Do i need to use photobucket or can i use my normal gallery on my comp? P.s have you got any pics of how you did yours? Cheers bud.

[stumpylewis]

http://i108.photobucket.com/albums/n40/jaydanovanut/IMG_20120809_160826a.jpg

[stumpylewis]

What you may not be able to see is the two main tubes coming from inside each chassis leg. They ar at roughly 50degrees.