|
Suzuki 4x4 Club™ Dedicated to all Suzuki 4x4 Owners
|
View previous topic :: View next topic |
Author |
Message |
JnDCustoms *
Joined: 26 Jun 2010 Posts: 49 Location: Runcorn
|
Posted: Tue Jan 25, 2011 11:15 Post subject: Suzuki SJ Project |
|
|
I bought a 1987 Suzuki SJ410 Van and i will be restoring it ready for the road, but i hope to use it doin a bit of green laning...
i bought it with a lot of rust:
_________________ Suzuki SJ410 VBJA
413 bonnet
3" wide arches
custom made front bumper
mengals 15" alloy wheels
255 70 R15 XP2000 tires
Pajero front seats
Central Locking
Made in Japan, Perfected in my garage..
Last edited by JnDCustoms on Sun Jan 30, 2011 19:22; edited 2 times in total |
|
Back to top |
|
|
Google Sponsor
|
Posted: Tue Jan 25, 2011 11:15 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
JnDCustoms *
Joined: 26 Jun 2010 Posts: 49 Location: Runcorn
|
Posted: Tue Jan 25, 2011 11:33 Post subject: |
|
|
I decided to give it a wash and pollish, and clean some rust off and paint it to try and protect it while i wait for somewhere to start getting it cut up, welded and painted....
_________________ Suzuki SJ410 VBJA
413 bonnet
3" wide arches
custom made front bumper
mengals 15" alloy wheels
255 70 R15 XP2000 tires
Pajero front seats
Central Locking
Made in Japan, Perfected in my garage.. |
|
Back to top |
|
|
JnDCustoms *
Joined: 26 Jun 2010 Posts: 49 Location: Runcorn
|
Posted: Sat Jan 29, 2011 18:32 Post subject: |
|
|
i started the interior while waiting for somewhere to get started welding new wider arches in.
i stripped the old plastic covers off the door cards and the centre tunnel and took out the old rubber mats and re-wrapped the door cards, made new mats and used some material for sound proofing/underlay and made a boot floor with some caravan insulation then built a hardboard floor, wrapped it with underlay material and then made a carpet to go over it, and fitted some speakers and a temporary tape deck:
10" Kenwood Typhoon for a bit of bass
i will be covering all the metal on the interior with material, hopefully it will be warmer inside and a cozier place to be when driving it around since this is going to be my daily driver.
it will be getting a complete respray, wider arches, wider wheels and tyres and eventually a 1.6 vitara engine... _________________ Suzuki SJ410 VBJA
413 bonnet
3" wide arches
custom made front bumper
mengals 15" alloy wheels
255 70 R15 XP2000 tires
Pajero front seats
Central Locking
Made in Japan, Perfected in my garage.. |
|
Back to top |
|
|
Tallbike ***
Joined: 11 Jan 2011 Posts: 180 Location: Eastbourne
|
Posted: Sun Jan 30, 2011 10:48 Post subject: |
|
|
I'm assuming you won't be doing too much fording in that as it would wreck them new carpets in double quick time... But compared to how it was when you got it, its coming along quite nicely and I for one will be interested in the finnished project when its complete! _________________ Driving a 99' Vitara JX 4U2...
Now in black
2" body lift & 2" suspension lift
31" MT tyres
Matching trailer being built from a 5 door Vit, watch this space! |
|
Back to top |
|
|
JnDCustoms *
Joined: 26 Jun 2010 Posts: 49 Location: Runcorn
|
Posted: Sun Jan 30, 2011 18:47 Post subject: |
|
|
thanks! i might do a bit of green laning in it, its mainly my daily drive, when its done anyway, the mats i made are already covered in mud from where it in now, but got it moved today onto some solid ground, will be building a shelter over it and the welding will be started soon, i cant wait to get started on it, ive got so many ideas for it...
any ideas people have ill be happy to hear them.... _________________ Suzuki SJ410 VBJA
413 bonnet
3" wide arches
custom made front bumper
mengals 15" alloy wheels
255 70 R15 XP2000 tires
Pajero front seats
Central Locking
Made in Japan, Perfected in my garage.. |
|
Back to top |
|
|
JnDCustoms *
Joined: 26 Jun 2010 Posts: 49 Location: Runcorn
|
Posted: Sun Mar 06, 2011 19:22 Post subject: |
|
|
update:
got the car in a building yesterday and got electric sorted in there
i got the car parked in the building using a ramp, as the rear started to get up the ramp after the front, the car decided it didnt need ramps and as the car accelarated up the ramp the rear wheels flung the ramps away so the car was half way up with the ramps on the floor and the car on top of them, so we put the car in 4wd and it got up the 16" step no problem
i was suprised it got its self up there with only one wheel on a ramp
we got the front and rear bumpers off today along with the old 410 bonnet, fitted the new 413 bonnet and it looks alot more like a meaty offroader
started marking out where were cutting out the rust and putting in new trailor arches to give the body wider arches and a bit of shape
also removed the rear door so we can get the rust chopped out of where the hinges are
whoever owned the car before me didnt look after it, when i took the front bumper off there was plastboard in the end of the chassis and the round bar behind the bumper is bent on the drivers side
the round bar on the passenger side behind the rear bumper is bent upwards, the rear door had a huge dent in it as if someone backed into something and pushed the spare wheel into the door, most of the back end is made of filler, si weve been srtipping all the filler and paint off it to find alot of dents big and small
so there's a lot of chopping and welding to be done...
i will upload pics as i go on through the build
my ideas are...
wider arches and bumpers and some nice side steps
wider offset wheels with big meaty tires (will be buying them very soon)
some chequer plate here and there
snorkel
front winch bumper (built in A' bar)
towbar bult into new rear bumper
maybe some truck style mirrors and a bigger cb arial
bodylift
big spot lights
safari style roof rack with rear number plate mounted to it
spot lights on the front of the roof rack
bigger spot lights on the front bumpers A' bar
all new interior...
and maybe some more...
have any ideas for it then go ahead and tell me, i keep seeing new ideas from other peoples sj's... _________________ Suzuki SJ410 VBJA
413 bonnet
3" wide arches
custom made front bumper
mengals 15" alloy wheels
255 70 R15 XP2000 tires
Pajero front seats
Central Locking
Made in Japan, Perfected in my garage.. |
|
Back to top |
|
|
Tallbike ***
Joined: 11 Jan 2011 Posts: 180 Location: Eastbourne
|
Posted: Mon Mar 07, 2011 6:24 Post subject: |
|
|
Oi bullbag! You stole my signature!!
Sounds like you got your hands full with that project... I'll hold back my opinions til the bitter end! _________________ Driving a 99' Vitara JX 4U2...
Now in black
2" body lift & 2" suspension lift
31" MT tyres
Matching trailer being built from a 5 door Vit, watch this space! |
|
Back to top |
|
|
JnDCustoms *
Joined: 26 Jun 2010 Posts: 49 Location: Runcorn
|
Posted: Mon Mar 07, 2011 10:54 Post subject: |
|
|
hahh i know but ive always been a fan of colin, and he was an amazing driver...
ok, well if you have ideas then id like to hear them
heres some pics of what we done yesturday...
new 413 bonnet makes it look meatier
the round bar on the left of the pic is bent back about half inch...
marked where the wing will be cut to get rid of all the rust
quite bad rust on the bottom corner, just covered in bodyfiller...
this corner is badly dented, so that will be chopped out and new steel welded in...
rear bumper removed...
the pics were taken on my phone so they arent very good, but it shows the work needed to be done...
and there isnt much light in there either... _________________ Suzuki SJ410 VBJA
413 bonnet
3" wide arches
custom made front bumper
mengals 15" alloy wheels
255 70 R15 XP2000 tires
Pajero front seats
Central Locking
Made in Japan, Perfected in my garage.. |
|
Back to top |
|
|
JnDCustoms *
Joined: 26 Jun 2010 Posts: 49 Location: Runcorn
|
Posted: Sat Mar 19, 2011 19:12 Post subject: |
|
|
done a load of work on it today
mainly chopping
we cut out the wings and arches ready for the new wide arches to be welded in tomorrow
here are some pics to show the work done today...
just held in place with a peice of wood to see how it looks...
ill upload more tomorrow, hopefully get some arches tacked it place, then start cutting sheet metal to go around it
will be buying some 8 x 2 inch box section for the new bumpers... _________________ Suzuki SJ410 VBJA
413 bonnet
3" wide arches
custom made front bumper
mengals 15" alloy wheels
255 70 R15 XP2000 tires
Pajero front seats
Central Locking
Made in Japan, Perfected in my garage.. |
|
Back to top |
|
|
JnDCustoms *
Joined: 26 Jun 2010 Posts: 49 Location: Runcorn
|
Posted: Sun Mar 20, 2011 20:47 Post subject: |
|
|
got my alloys today and started to build the arches, got the rear arches built and tacked, just need to be fully welded
start the front ones soon...
_________________ Suzuki SJ410 VBJA
413 bonnet
3" wide arches
custom made front bumper
mengals 15" alloy wheels
255 70 R15 XP2000 tires
Pajero front seats
Central Locking
Made in Japan, Perfected in my garage..
Last edited by JnDCustoms on Tue Mar 22, 2011 16:32; edited 1 time in total |
|
Back to top |
|
|
JnDCustoms *
Joined: 26 Jun 2010 Posts: 49 Location: Runcorn
|
Posted: Tue Mar 22, 2011 16:28 Post subject: |
|
|
got the front arches tacked in today can now start making templates for the rest of the holes...
heres some pics...
_________________ Suzuki SJ410 VBJA
413 bonnet
3" wide arches
custom made front bumper
mengals 15" alloy wheels
255 70 R15 XP2000 tires
Pajero front seats
Central Locking
Made in Japan, Perfected in my garage.. |
|
Back to top |
|
|
JnDCustoms *
Joined: 26 Jun 2010 Posts: 49 Location: Runcorn
|
Posted: Fri May 06, 2011 20:54 Post subject: |
|
|
started with the plating now, will hopefully be filling and priming soon, then get it sprayed with the radiant red and fit some chequer plate here and there, hopefully have it on the road soon, still need new rear springs, brake pipes and fuel pipes/hoses...
i will upload more pics soon, still need to buy the primer paint and filler, anyone know the best stuff to use? _________________ Suzuki SJ410 VBJA
413 bonnet
3" wide arches
custom made front bumper
mengals 15" alloy wheels
255 70 R15 XP2000 tires
Pajero front seats
Central Locking
Made in Japan, Perfected in my garage.. |
|
Back to top |
|
|
JnDCustoms *
Joined: 26 Jun 2010 Posts: 49 Location: Runcorn
|
Posted: Mon Jun 20, 2011 11:00 Post subject: |
|
|
not been on here for a while, started working on the SJ this week again, got underseal on and started fabricating some side steps...
New vs old:
Still a bit of triming to do on steps then they can be welded in, then its filler and primer _________________ Suzuki SJ410 VBJA
413 bonnet
3" wide arches
custom made front bumper
mengals 15" alloy wheels
255 70 R15 XP2000 tires
Pajero front seats
Central Locking
Made in Japan, Perfected in my garage.. |
|
Back to top |
|
|
JnDCustoms *
Joined: 26 Jun 2010 Posts: 49 Location: Runcorn
|
Posted: Mon Aug 12, 2013 17:45 Post subject: |
|
|
thought id do an update on here incase anyone happens to look at it...
my zuk is now on the road and has had quite some work since the last update on here..
it has had...
bullbar and front bumper, has been hand painted, new steering damper and springs all round, mitsubishi shogun seats, boot has been shelved and has a kenwood typhoon 10" subwoofer and 2x 6x9's in the shelf, rev counter, voltmeter, new carb and tuneup, towbar and towing electrics..
will add anything else i can think of...
photos..
_________________ Suzuki SJ410 VBJA
413 bonnet
3" wide arches
custom made front bumper
mengals 15" alloy wheels
255 70 R15 XP2000 tires
Pajero front seats
Central Locking
Made in Japan, Perfected in my garage.. |
|
Back to top |
|
|
scottperkins Newbie
Joined: 05 Oct 2013 Posts: 7 Location: United States
|
Posted: Wed Jun 04, 2014 10:54 Post subject: |
|
|
That is a mighty awesome rig you got there ! What kind of new carburetor did you install ? |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|