|
Suzuki 4x4 Club™ Dedicated to all Suzuki 4x4 Owners
|
View previous topic :: View next topic |
Author |
Message |
sj 413 *
Joined: 13 May 2008 Posts: 13 Location: norfolk
|
Posted: Tue May 13, 2008 19:37 Post subject: new boy! |
|
|
just brought me self a 1988 suzuki samurai sj 413 off ebay to put through an M.O.T and stuff for some fun and as me first car i will update you on this PROJECT as soon as im aloud to post some pictures !!
the only thing ive done to it so far is to remove the front driverside hub and wheel bearings as they desided to weld themselves to the hub and locking nuts ! so now on the hunt for wheel bearings, flange washer thingy and the two locking nuts and also i think there is ment to be a spacer aswell ?
wasnt on it or was melted ?
any help would be appreciated
thanks jim
slight bit of rust to contend with !!
need new wheel bearing !! and lock nuts and tab washer !! anyone know were to get them from ?? zuki dealer ?
|
|
Back to top |
|
|
Google Sponsor
|
Posted: Tue May 13, 2008 19:37 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
sj 413 *
Joined: 13 May 2008 Posts: 13 Location: norfolk
|
Posted: Sun Jun 01, 2008 20:09 Post subject: front axel? |
|
|
hey
just wondering if anyone know were i could get the front drivers side spiggot and wheel bearing locking nuts or a complete front axel for my suzuki sj 413?
does anyone have a complete front axel kicking about ??
thanks
jim |
|
Back to top |
|
|
mad *
Joined: 12 May 2008 Posts: 19 Location: kent
|
Posted: Sun Jun 29, 2008 22:37 Post subject: |
|
|
looks like your haveing fun with your moter hows it geting on |
|
Back to top |
|
|
sj 413 *
Joined: 13 May 2008 Posts: 13 Location: norfolk
|
Posted: Mon Jun 30, 2008 11:45 Post subject: sj |
|
|
very slowly, but i have got all the parts to be getting on with (piston rings, gaskets, filters, wheel bearings, spiggot ! etc)
so should be running soon!!
will keep you up to date. |
|
Back to top |
|
|
mad *
Joined: 12 May 2008 Posts: 19 Location: kent
|
Posted: Mon Jun 30, 2008 13:07 Post subject: |
|
|
i thought i had a lot to do with my rotten vtaira not looked at the engine and runing gear propely yet it is runing high on tick over nearly 2000 rpm and looks like the cluch needs replaceing hum think i may have got a bad one still will be good when all finished |
|
Back to top |
|
|
sj 413 *
Joined: 13 May 2008 Posts: 13 Location: norfolk
|
Posted: Mon Jun 30, 2008 13:57 Post subject: projects |
|
|
brilliant!!! got some work to do:D join the crew, but its all good fun!
good luck mate |
|
Back to top |
|
|
sj 413 *
Joined: 13 May 2008 Posts: 13 Location: norfolk
|
Posted: Wed Feb 11, 2009 20:28 Post subject: coming on nicely! |
|
|
well over christmas and that i didnt do alot, apart form watch it rot on the drive way!, but now the days are drawing out more, ive been getting things going again, managed to get it back on four wheels, both diffs have been checked and bearings/ seals replaced, propshaftes free'd up, breaks re done and bled, gear box well it was like a soup ladle( was only a little bolt pin thingy just under the boot inside the jeep) brought some better seats(out of an escort) su carb fitted and tunned up! just need to get the body work sorted(patched up ) and throttle and choke cables sorted then i can get it MOT'd!!! soon be there !
thanks alot for the help and that, will get some recent photo's up here soon as im done thanks |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|